Search results

  1. M

    SV Intercom 2S plus two comm radios

    I am planning on using a SV Intercom 2S in my HDX system along with a Garmin GNS430W and Garmin GTR200B as my 2 comm radios. I have studies the Intercom wiring diagram and have an idea how to proceed but if anyone can give me a mental picture of the wiring diagram, I would appreciate it. I...
  2. M

    Installing second HDX screen

    The Dynon transponder and Dynon ADSB units specify connecting to both displays. I believe the ADAHRS, ARINC, EMS and Magnetometer only need to be connected to the main display. I am still doing research on Garmin GNS 430W and Garmin GTR 200B. Any previous experience with a similar install?
  3. M

    KUS fuel quantity sender

    Anyone have any experience hooking up. KUS sender (SSS/SSL)? I’m a bit confused on the wiring Based on the KUS instructions and the Dynon schematics. m
  4. M

    Installing second HDX screen

    Well, I guess I know what you mean. I will be setting up the front display as the “master” as per the instructions. Once I hook up the SV net in the rear with the front, I jump at need to know what all are the inputs I need for the rear screen from the individual units (such as ADSB or GNS...
  5. M

    Installing second HDX screen

    OK. I think I have a better (yet weak) grasp of my setup based on your explanation. I have two HDX screens, front and back, each with its own battery. I have: Dynon EMS, ADAHARS, ARINC, SV Hub, XPNDR, ADSB, MAG, Heated Pitot and AOA, Tray and the SV Net cables I have a Garmin GNS430W, a...
  6. M

    Installing second HDX screen

    I am in the initial stages of installing a SV HDX system in a tandem seat aircraft. I would like to set up the rear screen as a repeater for the front (both screens have AV-30 backups). Besides the SV Net cable and the Ethernet cable, what other connections must I make between the screens? I...
  7. M

    24V flap position sender

    Well, After removing the 1950 potentiometer, it is very apparent that the overly complicated unit will not work. It should have been a hint that the sender had 5 wires connecting to it. It send info via three phase.
  8. M

    24V flap position sender

    Im putting a HDX on a 1959 Pilatus P3 and was wondering if it is possible to use the 24V feed from the flap position potentiometer?
  9. M

    Two comm radios

    Thx
  10. M

    Two comm radios

    I am installing a SV HDX 1100 and would like to install both a Garmin 430W and a Garmin GTR200. what are my options? Can I listen to both and control my mic on the control stick?
Top