Search results

YEP THAT DID IT. I had stock 16.0.4, all new and this 3 line code fix per the output after loading fixed it. THANKS so much for your help and suggestion, been in contact with tech support for a few weeks now (was out of town for some of that) and we did a lot of troubleshooting. But THIS did it...

I have been in touch with support already but they never mentioned anything around this GPS time glitch. I'll mention this to them!

Looks like you only get bad data on the ground at startup but then you do see traffic. I see no traffic whatsoever :-( Thanks for sharing, Robert

Inside the Dynon setup (button 7 & 8) you'll find an ADSB-In status and it'll tell you what you are seeing in stats. Screenshot is attached above.

Well yours is doing better than mine then ... I don't get any airplanes around me at all. Let me know if you figure out what's going on. Thanks!

Yes weather is enabled

Installed a full new panel with all the gizmos, HDX, TXP, AP, Radio, Intercom and ADSB-IN. Everything works except the ADSB-In, been trouble shooting this with Dynon now for a week and I am still stuck. So I thought I bring it here and see what the collective mind thinks. What's happening...

UPDATE - Yesterday I soldered in the phone and mic plugs, plus connecting the PTT wires to my push buttons ... Everything worked perfect. Thanks!!!

Yes thanks for the reminder!

Thanks super helpful!!!

So either I am not clear in my head anymore after wiring like a hundred wires or this is really confusing but how do I wire the PTT between the SV-INTERCOM-2S, the SV-COM-X25 and the PTT button on my stick? I do own the intercom wiring harness but the MIC cable isn’t very clear, there is a blue...

These drawings are amazing … What software did you use?

In section 7-72 for my SV-EMS-220/221 EMS it talks about configuring contacts, in my case for a fuel pump ON/OFF and canopy OPEN/CLOSED light on the EFIS. Unfortunately I cannot figure what is meant by “general purpose inputs” in the manual. For the canopy switch, do I just connect one side to...

Dynon has a servo mount for my Rv-4 pitch setup, but not roll. Looks like TruTrak has one for the RV8 that would work but I can't find any links, not under TruTrak nor Bendix, the new owner. Anybody got the link? Thanks Robert

I like it but where I can buy it for my RV4? TruTrak doesn't exist anymore and all searches lead to nothing :-( Suggestions?

Hmmm, interesting ... So what do people do? Have both? Only have the latter?

We have a smoke system. The bigger question now is where do I put the smoke system switch LOL

Thanks super helpful!

So I am confused about the Dynon Level button I just purchased, yes maybe I should have asked the question before buying I know :-) Is the level button also a disconnect or do I need 2 buttons for that? On my previous plane, I had a button that when I long pressed it, it would activate the AP...

Just purchased an RV-4, OMG that things flies amazing but yes the panel is terrible. So it's time for a complete Dynon panel redo. Anyone has a full schematic where they put all the different components? ADAHRS, AP servos, transponder and radio boxes, EMS and ideally also the VPX Thanks Robert