Search results

Downloaded data from my Skyview Classic EFIS and uploaded the files to Savvy Aviation..... everything shows up except for the oil temp readings. Just a flatline! Of course I always see the oil temp on my screen when flying...., so any thoughts on why it doesn't show up in the data/ graphs at Savvy?

Thanks for the response….I’ve been flying the airplane for over 2.5 years, ( 230hours) and this is the first time this has happened. I am not the builder so I’m not sure what resistor is installed, but why do you think it would all of a sudden need a higher value resistor? ( been working fine...

While flying yesterday, my tach readout on my Dynon Skyview started going crazy…. rpm were jumping all over the place between 2600 to 4000rpm! It did this for about 10 minutes and then returned to normal for the last 10 min of the flight. The Dynon EMS is connected to the right mag only,( Have...

Thanks Rico😏

Thanks… I was thinking that the display panels may require a direct connection….all the drawings I’ve seen show it that way. Appreciate the input!

I am adding a SV com to my Skyview setup. Looking at options to link it to the network. Currently I have two displays that have two network ports each. There is a network cable connected directly from one of the connectors on each monitor. Since the Com panel has two network connectors, I...

“NAME” : TEMP “FUNCTION”: TEMPERATURE C-37 P4 THANKS

Blank. Column label is “Oil Temp”.

Don’t know about the sensor, I did not build this airplane. I do see oil temp readings on the Skyview display.... The engine is an Aero Sports Power 0-375.

Exported my User Data for the first time, ( bought the plane in Jan). Signed up with Savvy Aviation and sent the files to them. Awesome amount of information! Only issue is that I get no Oil Temp data...just a flat line. Help!

Thanks Airguy.....that was the problem.👍

After many attempts and trying 3 different USB drives, I was able to download chart data, plug them into Skyview and everything was good. Kept two USB drives in my computer at home, each month the new data would automatically be downloaded. On the appropriate date, I would swap them out with the...

Yes...did that today ... works great. Thanks!

Thanks Brian....very much appreciated!

Thanks Jake, Using the splitter sounds easy. Can you give any details regarding the system config procedure? Walt

Next question: There are two connectors on back of unit.....Does the Knob-Panel have to be connected to both 10" screens?

Thanks!👍

The Knob-Panel looks great, but I am curious as to how to "plug it in" to my Skyview 10" monitor. Both 9-pin connectors on the back of the unit are in use.

Roger that....definitely will do. Thanks

This was recently posted at Van's Air Force forum regarding this subject: "I installed a Surefly with my Dynon SKyview Classic. I connected the original Slick mag P-lead to the Surefly and did not change the original Dynon resister or wiring. The tach signal from the Surefly to the Dynon...