Search results

Hi - very interesting - Today you say Flight Time is an *EFIS* thing. (as I had on my wishlist in Dec.) But in Reply #4 - Dec 1st, 2006, 1:24pm you said: .... if we do this, it would be on the EMS, not the EFIS. The EMS is the product where we keep track of flight times, hobbs time, and tach...

Is there any chance to get %-Power also for Rotax Engines in a future update? Regards, John

This would be a fine layout ::) - is this possible sometime? Regards John

I think I made any adjustment correct! NMEA In / NMEA out Output speed is set to "normal" (4800 Baud) I tried to change "Garmin output" enabled and disabled Everything works fine! Only the HSI is JUMPING !!! from correct to North - changing every second! Did anyone had this problem before ...

Hi! Today I hooked a Garmin 496 (V 2.9) to my D100 (V1.08). In the Forum is to read the 496 works well with the D100. But I have following Problem: All Data seems correct on the D100 HSI-Page! Also the HSI Needle works correct! For 1 second - then the needle jump to N. After another 1 second the...

I try it again - the last one! :-[ For flying in Europe it would be a very great feature to implement the Real Flight Time in the Time Page. Why to the EMS? In the EMS there are so many Times yet. But not in the EFIS. It´s OK to have the BlockTime on the EMS according to the Oil Pressure. I...

Hi Dynon ... Is the Serial to USB converter a part of the D100 package since shipping the D100? Because I buyed one in Okt. 2006 and my Dealer said there was no converter in the package :-( Regards, John

Hi…I have a technical question. I want to mount a EMS D10 to my existing analog Instruments. Is it possible to use the probes for Oilpressure, Oiltemp, Fuel Level together at same time with the EMS? John

Dynon .... It is nice to have the complete Time page on the EMS - But I have only a D100 :'( But perhaps I will order a EMS-D10 next year! And until next year, perhaps after cut off the main Power from the EFIS (and EMS) there will apear a screen (during time to acknoledge for stand by with...

Thanks ! THIS is exactly what I´m looking for ::) John

It was only an Idea :-[ Because in Europe the Billing is about the exactly Flight Time. Therefore we have to notice the Take off and Landing Time. Here you can buy a stand alone Product which do this for a lot of money http://www.oskar-clickfly.de/ The Block Time is not interested for...

Dynon .... what do you say? Is this a possible feature for the future? John

Have anyone mounted a D10 with the Flush Mount Bracket? Can I find somewhere a Picture mounted with the Flush Mount Bracket? I searched everywhere - I can´t find one! I´m going to order a EMS-D10, and want to see the different when it is mounted. John

Yes, Great Idea, I wondered it isn´t in function yet ;) John

Hi Dynon! One more Idea for a future update. Isn´t it possible to save the last (or more) take off and Landing Time in the EFIS? When the airspeed is coming on, the EFIS can store the Time (now we have GPS-Time ::)) And the EFIS can store the Time after getting slower then 30 kts! I think it...

Dynon ... I don´t know that it happened in a specific screen or menu - I will try to find out! It seems as you say, that the unit think one button is holding down. But it´s always the right Button, so I can do nothing! I can´t get out from the menu, and I can´t power down before I get out from...

Hi, Dynon .... I also have a little Problem with my D100. I have it since 6 weeks. Everything work very well, also the firmware upgrade. But Sometime the right Button have no function! So I can´t get out from the menue with the "Back" or "Exit" Button. It´s impossible! I have to power down with...

I also can confirm now - the Skymap IIIC works well with the new firmware. Great work Dynon !!! ::) (It doesn´t work until today, because "Data out" from the Skymap goes to the wrong pin) The Skymap IIIC only works with "AR 9600 Baud" how Dave wrote. But I think there is a little Problem with...

"Regarding previous problems with D100 HSI Course Indicator, today I changed the setup in the Skymap IIIC to output 'AR 9600 Baud' format and everything now works perfectly.  As discussed before, it won't work on the "NMEA0183" or the "Avionics Format" which are the other choices." Dave...Do...