Search results

I'm installing a Dynon heater AOA/Pitot. In the AOA/Pitot installation notes it says I can use one of the contact inputs to display the heater status. The EMS-D10 instructions from 10/19/2005 say the contacts aren't supported but will be in the future. The latest D10 instructions (page 5-19)...

I'm retrofitting a heated AOA pitot to replace a standard AN5812 on a Lancair 320. The designer's original location for the pitot head is just aft of the  wing leading edge, so with the extra 2 1/4 inches length of the Dynon unit, the AOA pitot head would be about an inch forward of the leading...

I have an EFIS D100, D10A and Garmin SL30. I plan to add a Garmin 496 or similar when closer to flying. No HS34 and no room in the panel. Page 3-6 of the Oct 2007 installation manual covers this case. I'm not clear about wiring the EFIS serial connections to the SL30. The Dynon manual says...

Thanks! On a second look I think I got the wrong threaded holes! I removed four plugs with an allen key to put the probes in. I think tha accessed the inlet manifold. There are other holes without plugs drilled into the fins of the cylinder head that don't have plugs. These look more plausible...