Search results

  1. C

    Dynon Support Program & Win8

    I am trying to update my D100/D120/AP74/HS34 with the DSP program on a windows 8 Lenovo laptop. I bought a new USB-Serial connector from radioshack which is supposed to be Win8 compatible. When I plug it in, it installs the drivers, but DSP says "Driver Error" and it can't communicate with my...
  2. C

    Flight Data Recorder Help

    I am trying to build a boom wing mounted recorder with a relatively simple setup/teardown for performance measurements on multiple aircraft. I would like for the boom to be 4 inches in diameter and be entirely self contained with no external wires to the cockpit. Would it be possible to buy...
  3. C

    Flight Data Recorder Help

    I am trying to build a flight data recorder much like the data logging the Dynon systems do. I would use a Dynon, but the size is too large for my application. My question to Dynon here is can you think of a way for me to shrink a Dynon D100 into a smaller unit? Could I disassemble it to fit...
  4. C

    HSI course

    Well, I tried pushing the bearing source button again and i got the cursor and was able to change the source. SO I am able to get the bearing pointers. I didnt change anything in my setup, so I was either goofing it up or the button was sticking in some way. Regardless, I am in business and...
  5. C

    HSI course

    Dynon, I found the following link: http://wiki.dynonavionics.com/Garmin_430/530_Wiring And it says that I need ONLY ARINC from the 430 to the HS34. I have wired the HS34 for a second handheld GPS using serial connection. Would that prevent me from getting the bearing to indications on the...
  6. C

    HSI course

    Thank you for your help! However, when I push bearing source, nothing changes when I rotate the value knob. Could you confirm that with my setup (GNS 430W/HS34/AP74/EFISD100) that I should only have connected the 430W to the HS34 via ARINC? If that is the case (assuming I have built the...
  7. C

    HSI course

    Pile on question: Reference EFIS-D100 Pilot User Guide p 6-8 I have a GNS 430W connected via arinc to the HS34 with an AP74.  When I select nav source GPS1 (the 430W) and enter a "direct to" waypoint, I get the pink CDI, but I do not get the yellow bearing indicator on the HSI. Also, when I...
Top