Search results

  1. R

    Dual D10a Installation question

    If I connect the two Dynon D10a units together, will they share nav data over the DSAB? If unit one has serial input from a GPS source and unit two has serial NAV from a SL30 (glide slope, localizer, VOR) input, will they share their data over the DSAB? Diagram...
  2. R

    Will an SL-30 drive a 106a indicator & Dynon D10a?

    Re: Will an SL-30 drive a 106a indicator & Dynon D Hello, Thanks for the quick reply. I am running 5.20 on the D10a with a remote magnetometer, OAT & Encoder.
  3. R

    Will an SL-30 drive a 106a indicator & Dynon D10a?

    Re: Will an SL-30 drive a 106a indicator & Dynon D The settings to accept data from the SL30 & 396 are: -Local Data Port >EFIS SERIAL >INPUT AUTO >BAUD RATE 9600 There is a problem switching direct from one source to another, it persists the prior source's data. I had to switch to the center...
  4. R

    Will an SL-30 drive a 106a indicator & Dynon D10a?

    Re: Will an SL-30 drive a 106a indicator & Dynon D Thanks, I will do that. Can I dl the config and post that or do I need to give instructions from the menu, press.... ?
  5. R

    Will an SL-30 drive a 106a indicator & Dynon D10a?

    Re: Will an SL-30 drive a 106a indicator & Dynon D Thanks for the info! The Serial port was not set to be active, after that it only shown GPS data. There is a data format setting that was set to NMEA, I checked the options, they were SL30, NMEA & AUTO. When set to auto it displayed nav data...
  6. R

    Will an SL-30 drive a 106a indicator & Dynon D10a?

    I have a Dynon D10a, Garmin SL-30, Garmin 396 & Garmin 106a indicator. The Dynon is the new piece of equipment that I want to add to the mix. Will the SL-30 drive both the 106a indicator & the dynon ? Are there any settings on the SL-30 that I need to change? I also plan on switching the...
Top