Search results

Re: Transponder check out I have just installed the Dynon decoder with the Microair T2000 FSL Mose C. Is there any check out I can do except putting in the parameter specified for the Display. Thanks N852LW. :)

I just received my EMS module back from Dynon and all is working great. Thanks to Dynon for the prompt turnaround. Cheers, N852LW

After 18 hrs of testing I have experienced a heading lock up both on the PFD and the GPS map. Anyone know of a reset or troubleshooting for this problem. Everything else seems normal.

Just checked the pulse count and guess what-it was set 90006.00. Apparently that was a human glitch when I checked the pulses previously. I am sure that this was the problem and apparently my error. As soon as the damn rain stops I will do another runup to check. I want to thank the crew for...

I was looking at database status for the RPM. When throttling up and down the data count would go up and down as well. One thing I didn't check, and I will do it today, is to see if the pulse numbers have changed. We had this happen once before when the tach quit the pulse count went to zero. We...

I have the 7" Skyview and everything has been working properly. This morning on runup I noticed no RPM indication. The icon is there but not reading RPM. Checked the database status on the input and it was going up and down in count with the RPM. That tells me that all the electrical from the...

I have heard reference before about downloading data from the Skyview. Does anyone know how or if this can be done. Cheers

Just as I was reading your post I thought I should check my EGT and CHT readings as well and sure enough they jump about 15 degrees as the PTT is pressed. I have the 7" system installed in a Pulsar III which is just about ready for first flight. Personally I don't think this is a particularly...