Search results

`Thanks!

I saw a picture of a Skyview main display where the engine monitoring items were placed at the bottom of the screen with the PFD and Nav panels above them. I have the classic 10 inch Skyview, not the touch screen. Is it possible to build this type of layout with my version? Thanks!

This update caused problems on my system with a UL 350iS engine. Once the update was complete the system could not process any run time or Hobbs data. So with Dynon's help I reverted back to 16.0.1 and that solved the problem. They said it would be reported as a bug.

Thanks for the advice. I replaced the female barrel the bayonet connects to and also cut out the spade connectors and soldered the wires together. Viola! Not sure which of those 2 actions solved the problem but it's working perfectly now. Yay! My guess is that one of the spade connectors had a...

I'm stumped. I have a Dynon Skyview with the EMS module. A few weeks ago my #4 CHT started acting up. At times it reads minus degrees :), other times it reads very low, jumps around or doesn't read at all (red X over the label). The EGT readings for #4 are normal. The other 3 cylinders read...

Thanks for that info. I do in fact have the GPS250. I've got a call into Dynon to walk me through my options to get this complaint.

Well this was a shock. After 8 years of flying my bird with the Dynon Tis-B transponder, today I get a letter from the FAA saying my ADS-B Out fails to comply. I have no clue what they are talking about and will call them tomorrow but wondering if anyone has a clue what might be going on? I have...

I installed version 16.0 yesterday and it went fine. Only thing I noticed different was the secondary GPS indicator is now blue (easier to see) and I no longer have a MAP indication on the EMS (red x). I was able to see MAP just fine on prior versions even though since it's a UL 350iS engine I...

I tried to find the answer to this in the new user manual but did not see it. My issue is that with a direct to destination in the Dynon I see the HITS upon take off and sometimes during the climb then it goes away most of the time mid flight. The boxes return as I descend. Is this how it is...

PLus 1 for that viewpoint. It's the one thing keeping me from buying my ADSB Dynon solution just yet.

Great job yet again Dynon! Thank you! The graphic for the HDX system shows the engine data running across the bottom of the screen. Will that capability be available for a non touch Skyview 10 inch display when v15 comes out? Sure hope so!

Does anyone know if the Dynon enhanced GPS puck for ADSB will qualify for this FAA rebate/ I didn't see any Dynon products listed on the FAA web site. Thanks

Does anyone know if the Dynon enhanced GPS puck for ADSB will qualify for this FAA rebate/ I didn't see any Dynon products listed on the FAA web site. Thanks

A huge shout out to the folks at Dynon and Mike in particular. My SV went tango uniform on Sunday, it would not boot. It was hung up on a line about USB RTIO interface. We have a yearly trip to the Talladega Race coming up next week and I explained this to Mike. Anyway they got my SV yesterday...

Adding the Dynon ADSB to my Skyview in my experimental has been on my wish list for 2 years since the build was complated. I'm reluctant to buy and install it anytime soon because my understanding is that it is not FAA complaint for the 2020 mandate (I have the Dynon transponder so already see...

I'm flying with a Skyview and UL 350iS engine. When we built the plane we installed the required sensors for MAP so we would have percent power data. I was told by Dynon at the time that percent power was not available for this engine as there was no data table. It's been 2 years since then and...

With 200 hrs on my SV 10 inch I am noticing at times in flight the PDF heading will differ from the GPS heading by 3 to 8 degrees in straight and level flight. It's intermittent and 90% of the time they match. Might be a dumb question but was wondering why this might be and what would cause it...

We have had V10.1 installed for a week. Two issues to report: 1. the map flicks in and out of red terrain mode while on the ground at random intervals. Works fine after t/o. 2. Today we lost the entire map display briefly after t/o. Just a red question mark. Stayed that way for about 30 seconds...

Took our V10.1 out for a test flight and everything is good, really like the 6 pack option just to change things up and the altitude intercept arc is very useful. But I am not seeing the value or use in the track line that is now showing on the map. How are people using this line?

10.1 fixed this multiple files issue on our system ... thanks Dynon! Much easier to use now.