Search results

  1. C

    DRX Won't Turn Off ???

    My DRX won't turn off when I press and hold the power button. I have to wait for the battery to run down. I went to the Dynon site, downloaded the most recent software update, logged into the DRX, and tried up update the SW. However, nothing seemed to happen. The "blue" power indicator...
  2. C

    SkyView A/P & GTN Flight Plan

    I am writing to ask for help understanding how to use the SkyView’s AutoPilot (AP) and Flight Planning (FP) capability, and the GTN 650. FWIW, I am a VFR pilot and do not have training in departure and approach procedures. I have a SV Classic, with the SV AP Control Panel, and a 2-axis Dynon...
  3. C

    GTN650 Comm Radio - Dynon Intercom

    I am installing a GTN650 and will connect it to my SV INTERCOM-2S that is already connected to my SV-COM-425. I will ad a switch to toggle between the 2 radios for the PTT button. Please confirm the following wiring diagram, including the use of 2 and 3 conductor shielded wire with the...
  4. C

    Intercom - Pilot and Co Cannot Hear Each Ohter

    Additional Info: I reviewed the SV Installation Guide and tried playing with the Squelch Level, Sidetone Volume, and Mic Gain settings. I tried 0, 50, and 100 and it did not solve the problem. I was hoping the Sidetone Volume setting was the issue. But it does not appear to be the answer...
  5. C

    Intercom - Pilot and Co Cannot Hear Each Ohter

    I have a SV system with a Dynon Radio and Intercom. If I leave the SV system off and just power the radio and intercom, everything works fine. In particular, the Pilot and the Co-Pilot can talk to and hear each other via their headsets when sitting in the cockpit and not transmitting. Each...
  6. C

    Capacitance[ch8208]to[ch8208]Voltage Converter installation

    Correctamundo !! I purchased a converter for each fuel tank. Thanks for checking. Jerry
  7. C

    Capacitance[ch8208]to[ch8208]Voltage Converter installation

    I've read the following information: It looks like we are missing a Table in Section 12 of the SkyView Installation Guide. It should show something like this: CONVERTER WIRE: Black SV-EMS-220 D37 PINS: Any of 5,13,16,17 or 20 FUNCTION: Ground CONVERTER WIRE: White SV-EMS-220 D37 PINS: And one...
  8. C

    Van's Tach Transducer - EMS PIN Wiring

    I would like to confirm which EMS PIN to use with the Van's Tach transducer. I am using the Van's Tachometer transducer (IE VTACHGEN 2) as the source input signal for both my Skyview and my backup Van's Tach Gage.  The Vans transducer has 3 wires, one for ground, one for 12V input power, and...
  9. C

    SV Hardware-Software Functionality

    Thanks for the information. I'll take a look and contact Tech Support if necessary. Jerry
  10. C

    SV Hardware-Software Functionality

    I'm wondering what the best way is to find out what SV functionality is available for a given HW and SW combination. I purchased my SV1000 in August of 2013 and after bench testing last winter, have now gotten around to installing it in the airplane. As part of the process, I have also done...
Top