Search results

After using the AP74- A recommend change would be have the BARO Pressure, HDG, ALT box change to a WHITE background color so we can easily see the change - the current color matches the screen too much, its hard to see the changes your making.  Just a suggestion to the next firmware update.   I...

Got back and checked my dis-connect button. It was a Normally Closed button. I changed to a NO (normally open) button and everything works great - thanks for the help and direction. Mark

Two issues: One the AP keeps dropping OFF after a short time (20 sec)? Fw 5.1.1 DSAB Line?   Do I need a shielded cable for DSAB wire lines?                                                                       Pin 4&5. Regards, Mark

Sounds Good, Love the Dynon SUPPORT. I wish all companies had this service. Mark

Any updates on when 5.2 release will be released?   Prior to Skyview?  or after?     Regards, Texas Flying

Does 5.1.1 software include all the power "off" issues that were fixed in 5.0.20 software patch that I loaded.    It killed the ghost, I just want to make sure 5.1.1 has it included.   Thanks in advance.  Mark

Dear Dynon - I've got a style 1 sensor, from the original D10 unit, I upgraded to the D10A got a new EDC but not a new OAT sensor, Do I need the type 2 sensor or the newest part number 100433-000? Regards, Mark

I'm getting higher readings from my OAT sensor, Its reading 137deg, when its 80deg outside.  At times the EFIS says, the OAT is not detected, then it comes back to 130+deg.    Does this sound like a EFIS issue or the sensor itself, or a wiring issue, the sensor has worked flawless for 4yrs now...

Dear Dynon, I've got a ghost in the system.  I've updated to 5.0 software a few months ago and once in a while when I get to the hanger the EFIS in ON and battery run down.  This weekend parked outside for two days in west Texas - uncovered the plane and the EFIS was on. Battery barely started...

Sounds Great - I'll work on the brackets - Mark

AP kit for the Glastar - Are you guys still on track for March09 on the Capstan 42's? Mark K

Dear Dynon - Sounds great.   Are the capstan assy attach points physically different from current servo's?  Will we have to attach a secondary cable and pulley similar to True Track setup?  Or will Dynon use the one single cable per axisand have a cable block or some other attachement assy...

I was looking for a time table for the "capstan 42" model for a Glastar setup,   Will you have a kit package similar to the RV series?  Looking to get back to Oshkosh with the AP instead of stick & Rudder. Regards, Mark K

Thats what I was thinking - just got worse and worse- could be a board? Mark http://dynonavionics.com/public_html/yabbfiles/Templates/Forum/default/cry.gif Cry

Dear Dynon: I've got a D10A - upgraded to 5.0v, What does it mean when I turn the unit on the screen goes blank white? Last week there were lines on the screen, but would clearup after a few minutes, now its a full white screen and difficult to turn-off. Please advise, its tough flying...

I try to pickup 3.0.0, but its not on the software page? After finding the link for 3.0.0 on the forum - it still does not find the software download? Its hiding from me somewhere on the site? Help me find it- Thanks Mark

What date will the new update be loaded to the website??????? Trying to get it loaded before the next trip

How important is the pitch of the EDC to match the EFIS-D10A pitch? I had the first version of the EDC, which was installed flat. But the new EDC says to match the pitch within .1deg Is this required? Just fine tuning the system. Regards, Mark

Got this HSI PAGE figured out........ I have a GNC300XL , with GPS data going out from J37 - Pin 19 into the D10A - Pin 22. Then you have to go back to the GNC300 and update the RS232 Channel 2 output. ( Config to "Plotting" on RS232- OUT ) See Garmin Manual for RS232 setup...

I just updated my D10 --> to the D10A and having trouble setting up the GPS input from My GNC300XL ( Pin 24 ) into D10A pin 22. I've updated RS232 on channel 1 to "aviation" mode - 9600baud rate? I'm trying to update the D10A for the data coming from the GNC300 but can not fine the...