Search results

I guess I should have said lean function not LOP. My engine is not fuel injected so no LOP operation for me.

I have another item that I feel could be improved. better LOP function, more like the Cirrus where it puts a marker at highest egt as well as + or - next to temp offset. Maybe a different color for the temp bar between lean and rich operation.

1) turns out the G205 was wired with gnd to the NC contacts and the NO had 12vdc. Removed the 12v and connected the ground to the NO contacts. 2) no side tone- I had swapped the outside 22 wires on the jacks. 3) 5v intermittent- found a poor solder connection. I had used the connections that...

Found all my problems. Getting old sucks.:(

Yeah, I caught on when I went back to the plane to recheck it. The 12v should not go to the G205 grip and the ground was on the incorrect contacts. Major case of short between the headsets- ME! Thanks for the replies

I ohmed the connections of the G205 grip and the N/c contacts are connected to gnd, the N/O contacts to 12vdc. When I push a trim button the switch closes applying the 12v. They are momentary switches. I will go check them again to make sure. Thanks for the reply.

I am just finishing up the install of my HDX to my RV-6a and am having a few issues. 1) trim worked before install, now when I push any of the 4 buttons and let up the motor runs for 6 seconds. this happens in all axis's. 2) Dynon intercom has no sidetone. I can hear the com radio fine with...

I just installed the HDX in my rv-6a. I have Ray Allen trim with (G405) buttons on the pilot side stick only. before the install it worked fine. After connecting through the AP panel when I push a trim button and let up it runs the trim motor continuously for 6 seconds. This happens in any...