16.6.0 AoA Calibration Issue

[andresmith76]

Dynon -

There have been multiple reports on this forum that the new AoA calibration procedure introduced in ver. 16.6.0 does not include the AOA Calibration Page detailed in figure 57 of the Nov. 2023 Installation Redline Guide (page 5-20). Could you please post some guidance on this issue?

 

[tylerpattison]

andresmith76,

Could not find the multiple reports that you are referencing. Can you provide a link?

Just tested it on my unit and it's working normally. Are you sure you are in the in-flight setup menu and not the normal setup menu?

 

[tylerpattison]

To clarify, this function is only available if you have an electronic flap position sensor installed and connected to SkyView.

 

[Rhino]

He may be talking about this thread:

firmware 16.6.0 thank you Dynon

Thank you @Dynon for the improvements in AOA indicator introduced in 16.6.0 Please keep up the good work and bring the AOA functionality up to the "on the speed" standard

forum.flydynon.com

 

[andresmith76]

To clarify, this function is only available if you have an electronic flap position sensor installed and connected to SkyView.

Thank you for this clarification. I didn't see this in the updated installation manual.
I was using the in-flight setup menu but do not have the flap position sensor installed/connected.

Rhino's link is to the thread what I was referring to.