1962 Cessna 182 Dynon panel coming soon

[JP JR]

1962 Cessna 182 getting ready for dynon full panel

 

[Dynon]

Nice!

 

[JP JR]

 

[Brandon]

Did you do a cad drawing. My 205 panel is larger but similar. I would like to include the switches and breakers like yours. Is there any way I could get that portion of the file.

 

[JP JR]

Dave at Ramona Avionics did the CAD drawing and has the DER that has the engendered endorsement for the structural changes. Give him a shout and he’ll be able to help.

 

[Brandon]

Thanks

 

[JP JR]

Coming along beautiful

 

[JP JR]

 

[JP JR]

Panel color is set decided to powder the door handles and a few othe bits as well..

 

[JP JR]

Color

 

[JP JR]

USB install inside glove box

 

[JP JR]

Door handles match color

 

[JP JR]

Panel ready for labels and install

 

[ExCon90]

Did you do a cad drawing. My 205 panel is larger but similar. I would like to include the switches and breakers like yours. Is there any way I could get that portion of the file.

Did you do the install on your 205? I’m thinking of doing my 205.

 

[Brandon]

We are still working on the install. Definitely a tight fit

 

[ExCon90]

We are still working on the install. Definitely a tight fit

What size screen are you using? What autopilot do you have? Which GPS navigator will you use? Hope my questions aren’t too intrusive.

 

[Brandon]

10” screen. Garmin 175. No autopilot for now.

 

[ndmoulin]

10” screen. Garmin 175. No autopilot for now.

Brandon,
Fixing to start on a 182P install and am wondering if Dynon will allow install of any of their autopilot hardware. Specifically would be looking at installing at least the servos and the cutout for the AP head unit then once they get approval for the 182 then it should be fairly simple to finish it out. Thoughts??

 

[Brandon]

We are going to cut panel for autopilot and prewire some of it. Then hope for an approval. Hardware will have to be installed after approval

 

[JP JR]

Same here.. you can’t buy the servos or the autopilot control buttons yet but you can pre wire everything so it’s ready to plug-in and install when they get the certified check done. We Had our panel cut for the autopilot control so it will be a easy install