We have two SV-1000 (running 13.0.3.3233) fitted with two ADAHRS. The a/c has done around 10hrs with no issues. Last flight was about a month ago. During start-up both Screens showed ADAHRS failure (the big red cross). Checking the start-up screen log all is good except that the "Init Sensor Chararcterization" shows "Failed".
The panel message indicates a mag compass calibration is required, but you cannot access the compass calibration in the Hardware set-up. I have tried shutting down and starting up several times but no change. Suggestions ??
The panel message indicates a mag compass calibration is required, but you cannot access the compass calibration in the Hardware set-up. I have tried shutting down and starting up several times but no change. Suggestions ??
