Adding AFS-5600 to Dynon D-100/120 panel

lawdogf16

I love flying!
Joined
Feb 24, 2016
Messages
1
I have a D-100, D-120 & HS34. I am getting an AFS-5600 (with the SV-ARINC 429 network) and getting rid of the D-120. I am keeping the D-100 & HS34. Is there any way to wire my 430W GPS individually to the 429 and D-100 or must I splice off the current connection to the D-100. I was thinking I could connect the 429 and 430W through ARINC and the HS34 & 430W through serial.
 

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,232
Location
Woodinville, WA
If you use the serial connection to the HS34, you'll lose the NAV radio side of the 430's output. Also, the GPS won't do things like auto-scaling of the needle and such on the D100's HSI.

There's no reason you can't split the transmit side of the 430's ARINC to both the AF-5600 and the HS34. You'd probably want to have the AFS unit transmit back to the 430 though and move that half of the connection off the HS34.
 
Top