ADHARS FAIL

[Yannick]

Hello,
We install Dynon with adhars.
On screen there is a red cross with ADHARS FAIL.
On Network status: 2 ADHARS ppears but with status offline
I made a new configure and 1 adhars in yellow is recognized and configured, but red cross with adhars fail continues to appear.
In network status, ADHARS appears in yellow with status: newer than copy
In message: "Software mismached"
In calibrate menu:  HARS not detected...

Somedy can help me ?
Many thanks

 

[dabear]

I would say that the SW version on the ADHARS is newer than on SV. 

Update to latest version of SW on SV. 

http://dynonavionics.com/docs/support_software_SkyView.html

Then after SV reboots, and loads all modules, check what you see.

NOTE:  Please read, and read again the Install Manual

http://dynonavionics.com/downloads/...em_Installation_Guide-Rev_P_Software_v7.0.pdf

Pages 3-14 to understand how to update software.

After update, what do you see on the configuration menu?

 

[TRCsmith]

How about no fail after installs. Ck wiring and install manual again.

 

[Yannick]

Many thanks Dabear, all works now