Would Dynon support foresee any problems with mounting the ADSB-470 adjacent, within just a few inches, to the ADAHRS module on a shelf in the aft RV-8 fuselage? My concern is any magnetic interference generated by the ADSB-470. Would non-magnetic hardware be prudent for the 470 unit as well as the ADAHRS module?
Adjacent mounting of ADSB-470 and ADAHRS
- Thread starter aerovin
- Start date
Though it's not a high-powered device, it is a piece of electronics with various components inside that are ferrous. Our generic recommendation is a foot for something like this - you might be able to get closer - but you'd need to test your particular installation distance and relative positioning of the devices to be sure.