ADS-B data format

[Mzwijacz]

Does anyone have the data format for the Dynon ADS-B receiver ? I believe it is an "enhanced" GDL90 format, but cannot find any documentation. I want to send ADS-B data to multiple devices. I'm thinking of connecting an ESP-32 micro controller and writing a program to convert the data to Capstone/Open ADS-B/GDL90 standard format. But, in Appendix E: Serial Data Output, There is no description of the ADS-B format. I know the Wifi adapter can send ADS-B out to "some" tablet EFB's. But not mine.

Thanks,

Michael Z.

 

[d3mac123]

I would love to hear about that as well. Anyone from @Dynon here?

 

[bleighty]

Does anyone have the data format for the Dynon ADS-B receiver ? I believe it is an "enhanced" GDL90 format, but cannot find any documentation. I want to send ADS-B data to multiple devices. I'm thinking of connecting an ESP-32 micro controller and writing a program to convert the data to Capstone/Open ADS-B/GDL90 standard format. But, in Appendix E: Serial Data Output, There is no description of the ADS-B format. I know the Wifi adapter can send ADS-B out to "some" tablet EFB's. But not mine.

Thanks,

Michael Z.

I haven’t had a chance to investigate but this sounds promising.
For ADS-B data and georeferenced maps/plates/charts you first connect your tablet to the SkyView WIFI
Then on the FltPlanGo App side panel go to EXTERNAL > CUSTOM UNIT > PORT 4000
Enter your tail number in the ADS-B section of your MAP page or you will get traffic alerts on your own airplane. Let me know if you get it working

 

[n144sh]

This would be great if you get it going. It should allow sharing traffic with Avidyne IFD series as well if capstone format