I use the Skyview Classic touch in six pack view, when the airspeed goes above 90 kts the indicated airspeed in digital view in the centre of the airspeed indicator is highlighted red even though all V speeds are entered correctly in setup and vne is set at 182kts. How do I correct this ?
Airspeed indicator in six pack view
- Thread starter JUSTNUZZA
- Start date
Patrick J Wenzel
New Member
- Joined
- Nov 2, 2019
- Messages
- 22
Seems telling that it consistently happens at that airspeed.
Simplest option first:
Check your EMS settings for flap and landing gear overspeed - regardless what you actually have on the airframe. Do they have defined ranges, are the warnings self-clearing or latching?
Do you have a flap position sensor? Is the flap position displayed on the screen? If not, temporarily put the flap position widget on any of your 20/50/100% screens, retract the flap fully, confirm it displays 0° and see what happens when you push and pull on the trailing edge.
Same for landing gear.
Simplest option first:
Check your EMS settings for flap and landing gear overspeed - regardless what you actually have on the airframe. Do they have defined ranges, are the warnings self-clearing or latching?
Do you have a flap position sensor? Is the flap position displayed on the screen? If not, temporarily put the flap position widget on any of your 20/50/100% screens, retract the flap fully, confirm it displays 0° and see what happens when you push and pull on the trailing edge.
Same for landing gear.
Thanks, will give that a go .
It's a known bug in six-pack mode. The fix is slated for our next release.
We don't yet have a release date to share.