Alert logs

[swatson999]

I've noticed something while ambling through the Alert Logs...nothing of any real significance, just that it might be an item to sort out during the boot process.

Seems that, on every boot cycle, I can see right after the "Boot" alert log entry that either the Pitch Servo or the Roll Servo is alerted as "off-line". Seems to happen every time.

No big deal because they never really are that I ever see, just indicates to me that the boot process is getting ahead of the subsystems, not allowing them time to come up, and it's reporting their status before they've had a chance to fully boot themselves. A wait state or two might solve that...

Again, just an observation.

Oh, and my system nearly always still has the audio cutting out when it says "Dynon SkyView" on boot. It says "D--on SkyView".

 

[dynonsupport]

Steve,
Are your servos powered on while SkyView boots, or do you turn them on at some point after? If you're booting SkyView on the backup battery you'll get this too. Just checking before we look into this in case it's fully expected.

 

[swatson999]

They are all powered at the same time from ship's power, when I turn the Master on (no Avionics Master). Nothing is being powered from the backup battery.

 

[swatson999]

Any info? Similarly, any word on the audio drop-outs during boot?

 

[Dynon]

We've heard a few reports of small audio anomalies like this, but haven't been able to find anything systemic there unfortunately.