Currently working a connection of a KX-165 and G-295 to the HS-34. I have been able to reconcile most of the outputs the following...
1) What is the Dynon system expecting with the LOC+ and LOC- inputs. Do not see an equivalent output in the 165.
2) The resolver outputs from the KX-165 are labeled as C,D,E,F,G,H where as the HS-34 is expecting A,B,C,D,E,F. Do I wire for letters to correspond, i.e. C through F only or do I match A to C, B to D, etc for all 6 connections?
3) For a Garmin 295 connection; does the data out pin out of the 295 connected to pin 15 or 2 in the HS-34?
Any thoughts would be appreciated.
Thanks
C.
1) What is the Dynon system expecting with the LOC+ and LOC- inputs. Do not see an equivalent output in the 165.
2) The resolver outputs from the KX-165 are labeled as C,D,E,F,G,H where as the HS-34 is expecting A,B,C,D,E,F. Do I wire for letters to correspond, i.e. C through F only or do I match A to C, B to D, etc for all 6 connections?
3) For a Garmin 295 connection; does the data out pin out of the 295 connected to pin 15 or 2 in the HS-34?
Any thoughts would be appreciated.
Thanks
C.