anyone try to load older software?

[cwood2000]

Since 16.2.4 was loaded I have a couple of things that no longer work, has anyone tried to load 15.4.7, the older version? I am hesitate to attempt it unless someone else has done it. Dynon says they will have a fix at some point.

 

[skysailor]

Rolling the software back is possible but requires two files from Support and then you will need to do a Force Network Load to get all the modules back to the 15.4.7 version. I did this with my systems because I find the version 16 VNAV solution unsatisfactory in both arming and display. It works the same once engaged but I also think there is a possible safety issue for a distracted pilot because of the display.

 

[RV8JD]

I downgraded from v16.2.4 to v16.0.8 because of a few bugs in v16.2.4. You will need to contact Don (Dynon Support) and he will send an email with instructions, a couple of files, and a link to download v16.0.8. You will also need to reload an older USER CONFIG file.

See these posts:

Hobbs Time and Tach Time Flight Durations with v16.2.4

I updated my SkyView Touch from v16.0.4 to v16.2.4 and have flown four flights with v16.2.4. Since updating to v16.2.4 the Tach Time flight duration has been longer than the Hobbs Time flight duration. This is a change from my norm, where the Hobbs Time flight duration is almost always longer...

forum.flydynon.com

and

Hobbs Time and Tach Time Flight Durations with v16.2.4

I updated my SkyView Touch from v16.0.4 to v16.2.4 and have flown four flights with v16.2.4. Since updating to v16.2.4 the Tach Time flight duration has been longer than the Hobbs Time flight duration. This is a change from my norm, where the Hobbs Time flight duration is almost always longer...

forum.flydynon.com

 

[cwood2000]

Thanks for the feedback!