AOA Calibration - Pitch oscillation requirement

[steve m]

When calibrating AOA with the new software (16.6) the manual states we need to "oscillate the aircraft between +\- 5 degrees pitch 4 times", does this "pitch oscillation" need to be performed between each stall\flap configuration or only once at the beginning of the entire calibration process?

I wasn't sure so I performed the pitch oscillations prior to each stall.....If the answer is only set of oscillations do I need to repeat my calibration....?

 

[airguy]

Historically it's been only one set to start the calibration routine no matter how many stalls you do, not sure if that changed for 16.6.0

 

[Dynon]

Only once. this procedure demonstrates what low AOA looks like to the calibration routine.