AP started flying me in tight circles

blueflyer

Member
Joined
Jun 15, 2012
Messages
123
I have had my dynon autopilot connected and flying via my IFLY720 for about 6 trouble free months.  Yesterday, after flying on the autopilot for about 30 trouble free minutes, it started flying me in 360 degree circles.  So, after about the third circle, I disengaged the AP and continued on my flight to my destination.  About 5 minutes later, I re-engaged AP, and within a minute or two, it started flying me in circles again. What in the world could be going on here?

I did seem to notice that about 10 minutes before the circles started, the AP was making larger than normal corrections to stay on the magenta line.  The wind at my altitude had not picked up, and no outside forces that were acting on the plane had changed.   I cant really explain it much better than that, but it was just that something didn't seem right with the autopilot in these 10 minutes prior to the circles.
 

skysailor

Active Member
Joined
Oct 17, 2008
Messages
596
Did you try HDG or TRACK mode for the Dynon to eliminate the possibility the IFLY720 is causing this by commanding the turns? The Dynon autopilot does what it is told (as shown on the HSI) when in NAV mode.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
Is it possible you engaged the new Go-Around Mode that was introduced in v14.0?

I have had my dynon autopilot connected and flying via my IFLY720 for about 6 trouble free months.  Yesterday, after flying on the autopilot for about 30 trouble free minutes, it started flying me in 360 degree circles.  So, after about the third circle, I disengaged the AP and continued on my flight to my destination.  About 5 minutes later, I re-engaged AP, and within a minute or two, it started flying me in circles again. What in the world could be going on here?

I did seem to notice that about 10 minutes before the circles started, the AP was making larger than normal corrections to stay on the magenta line.  The wind at my altitude had not picked up, and no outside forces that were acting on the plane had changed.   I cant really explain it much better than that, but it was just that something didn't seem right with the autopilot in these 10 minutes prior to the circles.
 

blueflyer

Member
Joined
Jun 15, 2012
Messages
123
I have the D100 in my plane, so no go around mode. I will fly again to see gather more info. It could have been erroneous info from IFLY, but I don't think I will ever be able to determine that. I will try track and heading mode too. That is a good idea. I will report back.
 
Top