Approach plates

[mataylor]

If I select an approach from the Seattle avionics onto the SkyView is there an easy way to put the waypoints into the SV flt plan?

 

[Dynon]

The approach plates don't have any database information tied to them, so not directly. However, if you have an IFR navigator like the 430 or GTN, you can have SkyView display it's guidance - instead of SkyView's own - on the both the map and on the flight plan page. This guidance includes all of the fixes/waypoints/etc.

 

[mataylor]

I do have a 430 and I'm not certain how get it's info onto the SV. I may have a wiring problem integrating the 430 into the overall system.

 

[swatson999]

I do have a 430 and I'm not certain how get it's info onto the SV.  I may have a wiring problem integrating the 430 into the overall system.

Via the ARINC interface box.

 

[kurtfly]

Mataylor, if you have the GNS 430 wired correctly when you tap the PROC button on the GNS 430 and select then load an approach all the applicable waypoints will be transfered to SV. You need to make sure the GNS430 is selected as the Flight plan source in SV.