Hello,
According to page 17-12 of the SkyView system installation guide, when 2 radios are installed with an intercom, there is only one switch to select either the PTT of radio 1 or radio 2. There is no issue on that side. However I always hear the 2 radio audio. Is there anyway in the HDX configuration to select the audio of COM1 or COM2 ? Lower the volume of one radio doesn't help, I can still hear it in the background.
Thanks for the support
According to page 17-12 of the SkyView system installation guide, when 2 radios are installed with an intercom, there is only one switch to select either the PTT of radio 1 or radio 2. There is no issue on that side. However I always hear the 2 radio audio. Is there anyway in the HDX configuration to select the audio of COM1 or COM2 ? Lower the volume of one radio doesn't help, I can still hear it in the background.
Thanks for the support