Chevy engine LS1 to Skyview EMS

[Jamie]

A friend has a chevy LS type engine, is it possible to connect this to a skyview EMS ?
I have mine connected to a lycoming engine, and have no idea about the chevy computer needed to run it.
I did see that an RV10 had a EIS4000 connected, so I guess it may be possible.
Please post links if you know of any.

 

[Jamie]

Anyone know how to do it please ?

Dynon Support ?

 

[Dynon]

Yes, but not via the ECU. You'll need to attach conventional sensors. We actually even support the LS7 pre-installed coolant temperature sensor (see the installation guide for details). As for the other sensors, there have been a few people that have done the LS7 before (the SeaBee guys are the ones that come to mind, and are the community that prompted us to do the cooltant temp support back in the day), and we couldn't tell you which sensors would be the ideal fitment. But all of the supported sensors are listed in our price list, which you can find in the upper-left corner of our home page. About the only other thing you'll need to work out is a tach signal - the EMS requires a 10V pulse to be able to register a tachometer reading.

 

[Jamie]

Thank you, looks like I have home work this week.