Com 425 and Com panel not powering up

[Timberwild]

New member as of today, searched for this topic but didn't find specific discussion. I just installed the Skyview D1000 Classic with intercom and com radio. Com harness was made by Aircraft Spruce included in Dynon purchase and is connected properly, as are all power and ground wiring. All other modules, boost pump, etc. appear to power up and work fine, but the com panel does not light up when the intercom does. Any ideas are appreciated. Thanks.
Wyn

 

[Dynon]

The Com radio control panel is actually powered by SkyView Network, so you'd only expect to see it come on when SkyView itself is powered on.

 

[Timberwild]

Thank you. I'll try that.

 

[djones]

Actually, the com radio control panel is actually powered by the radio and will only light up when power is applied to the radio.