I am installing Skyview in Vans RV 12, while in the Network Config I get Connection Fault (in yellow) 4/8 just below the pitch servo status. Cant seem to find this fault code anywhere. Any suggestions appreciated. Fly Safe John
I am installing Skyview in Vans RV 12, while in the Network Config I get Connection Fault (in yellow) 4/8 just below the pitch servo status. Cant seem to find this fault code anywhere. Any suggestions appreciated. Fly Safe John
It's become apparent from your, and other feedback that we've received that we need to add more detail to the manuals to address troubleshooting these messages.
This message is telling you that the SkyView display(s) cannot communicate with your Pitch servo "Pin 4" (white/blue wire) / "Pin 8" (white/green wire), which is the secondary data bus that was activated and now monitored beginning in v4.0 firmware.