Contact input with stall audio warning.

[martinvdb]

It would be nice if I had the possibility to connect a contact input from the EMS-120 to my stall warning system switch to sound the STALL audio alarm.

Is it not possible, via a software update, to give the user the possibility to make this connection?

 

[dynonsupport]

There isn't a way to connect it to the stall warning, but it can sound the general EMS alarm.

 

[martinvdb]

There isn't a way to connect it to the stall warning, but it can sound the general EMS alarm.

In fact the question is if it would be possible to make this available with a future software update.

 

[dynonsupport]

Good news! We implemented this overnight and installed it into the software which is already in your product at home! Actually, I misspoke. It turns out that there is a setting on the contact inputs that does exactly this - fires the AOA alarm.

 

[martinvdb]

For some reason I have missed this setting.
Can you tell me how to do this?

Good news! We implemented this overnight and installed it into the software which is already in your product at home! Actually, I misspoke. It turns out that there is a setting on the contact inputs that does exactly this - fires the AOA alarm.

 

[dynonsupport]

Page 5-2 of the D120 install guide.