Course display on Skyview map

[JTD]

When navigating from my GNS430 it draws the selected course on the map as expected. If a GPS waypoint is inserted into the flight plan that you wish to hold at, and you select OBS on the 430, and dial in a course using the skyview course knob that you plan to hold on, no course line is depicted on the map. Any ideas?

 

[dynonsupport]

The data for the course line is output differently when in OBS mode and SkyView doesn't currently support this data format. Or primary goal was to implement enroute flight plans and loaded procedures so supporting OBS mode wasn't a primary goal and didn't make it into the project. So for now, what you see is expected.