D-120 Display Setup

[MikeW]

Our D-120 EMS displays only two lines for the four cylinders' EGT and CHT readings, combining two cylinders each. Is there a way to separate the cylinder readings out to show all 4 cylinders' values? (We have a Rotax 912 in our Flight Design CTLS).

 

[Dynon]

Yes. You can choose 4 EGTs and 4 CHTs in the SETUP > GLOBAL menu. You may (or may not - I don't have a D120 handy) need to disable the Rotax mode, I forget.

 

[MikeW]

Thanks, I'll give it a try and hope the D-120 version that goes with the Rotax 912 allows for showing all 4 cylinders.