indiafoxtrotecho
I love flying!
- Joined
- Feb 17, 2015
- Messages
- 9
Hi folks, first time poster.
I've had the Dynon D10 EMS installed in my C82R since around September 2014. I have previously successfully uploaded the Dynon log files to the Savvy Mx website for flight analysis of EGT, CHT and other engine parameters.
I’ll post a link to my Dynon D10 flight uploads to Savvy MX here when I've done two posts, but in the meantime:
The four most recent flights (Nov 2014 to present) all show up as having durations of around a few minutes each.
In fact they were around an hour or more each. I have reloaded them to Savvy with no effect.
These were two separate uploads, conducted in exactly the same manner as the earlier flights, and onto the same notebook – no variables in play. Data on the Dynon is always deleted straight after the successful download.
I logged a ticket with Savvy, and they were unable to help at that end.
It seems there’s a problem with the data coming from the Dynon unit, that didn't exist before. So now I cannot chart or analyse my engine data.
Anyone else had similar issues, or can suggest a fix please?
PS - the Excel .csv files all look fine on the PC before upload to Savvy, as far as I can tell...
Regards,
ife
I've had the Dynon D10 EMS installed in my C82R since around September 2014. I have previously successfully uploaded the Dynon log files to the Savvy Mx website for flight analysis of EGT, CHT and other engine parameters.
I’ll post a link to my Dynon D10 flight uploads to Savvy MX here when I've done two posts, but in the meantime:
The four most recent flights (Nov 2014 to present) all show up as having durations of around a few minutes each.
In fact they were around an hour or more each. I have reloaded them to Savvy with no effect.
These were two separate uploads, conducted in exactly the same manner as the earlier flights, and onto the same notebook – no variables in play. Data on the Dynon is always deleted straight after the successful download.
I logged a ticket with Savvy, and they were unable to help at that end.
It seems there’s a problem with the data coming from the Dynon unit, that didn't exist before. So now I cannot chart or analyse my engine data.
Anyone else had similar issues, or can suggest a fix please?
PS - the Excel .csv files all look fine on the PC before upload to Savvy, as far as I can tell...
Regards,
ife