D10A and 396

[petehowell]

I have my 396 connected to the Dynon EMS, SL-40, and a TT ADI Pilot 2.   A D10-A is connected to the EMS over DSAB.  Has anyone been able to get the 396 to feed Freq to the SL-40 and the altitude readout on the HSI?

Seems like I need the VHF coupled to the NMEA slow (4800) format.

Thanks,

Pete

 

[Bill_Denton]

Go into the Main Menu, then select the Setup tab and the Interface sub-tab.

Select either Aviation In/NMEA & VHF Out (if you want to use it as a mini-MFD with another GPS) or TIS In/NMEA & VHF Out (if you want to display traffic from a GTX 330).

It shouldn't make any difference which IN you choose if you aren't actually feeding anything in...

 

[petehowell]

Hi Bill,

The 396 was set to Aviation In/NMEA & VHF Out , but I was not getting altitude on the HSI.  I set it to NMEA in /NMEA out and set the advanced to slow.   I would then get the HSI Altitude but not radio freq loading to the SL40.   I decided last night that the radio was a more imprortant feature than GPS altitude and set it back to Aviation In/NMEA & VHF Out .  So I go fly today and guess what, I get both the altitude and the frequencies.   Not sure what I did, but it all works now.

Let's call it user error..

Pete