There is a setting for when the audio alert begins, with options like "top of yellow", "bottom of yellow", etc. I find them a bit unclear. Which setting has the audio alert start sooner when approaching a stall and which has it start later?
D10A AoA audio settings
- Thread starter nwetter
- Start date
jakej
Well-Known Member
Download this, if you do not have it & refer to pages 7-30 to 7-31 https://www.dynonavionics.com/includes/guides/EFIS-D10A_Installation_Guide_Rev_J.pdf
Come back if that does not work for you
Come back if that does not work for you
Download this, if you do not have it & refer to pages 7-30 to 7-31 https://www.dynonavionics.com/includes/guides/EFIS-D10A_Installation_Guide_Rev_J.pdf
Come back if that does not work for you
I'm quite familiar with this document, but I find the wording on this particular issue a bit unclear.
Europa-RAF
New Member
- Joined
- Aug 22, 2020
- Messages
- 1
The Audio Alert Setting for AOA on my D100A is set to 'bottom of yellow'.
However alarm starts at the same time as the plane is actually stalling. From Dynon I have been told to read the manual, which have done and followed. I'm now told from Dynon, that I probably have made the setting to be 'red' and 'bottom of yellow' at the same time, and the 'red' setting will then overrule the 'bottom of yellow' setting.
I find it hard to understand how that is possible as I have the choice between more settings but can only choose one setting.
Do some of you guys on this fora know how I can make it work?
Thanking in advance for any advice.
However alarm starts at the same time as the plane is actually stalling. From Dynon I have been told to read the manual, which have done and followed. I'm now told from Dynon, that I probably have made the setting to be 'red' and 'bottom of yellow' at the same time, and the 'red' setting will then overrule the 'bottom of yellow' setting.
I find it hard to understand how that is possible as I have the choice between more settings but can only choose one setting.
Do some of you guys on this fora know how I can make it work?
Thanking in advance for any advice.
I think you're also working with our support team (please continue that thread), but a few thoughts:
Do you get a smooth progression on your AOA indication? (taking a video would be helpful here)
What is the inhibit below setting set to?
Do you get a smooth progression on your AOA indication? (taking a video would be helpful here)
What is the inhibit below setting set to?