D10A + SL30 LOC issue

[georgev]

Hi, I have a D10A (no remote compass, no H34) connected via a simple switch to GNC250XL and SL30 via RS232. The primary purpose of the D10A installation was to get a (fancy) CDI indicator. Everything works as expected with an exception of Localizer CDI during ILS approach. I get the CDI sense reversed (meaning I have to fly away from the bar, not towards it). VOR and even back course Localizer is OK. Am I doing something wrong or this is a D10A bug? The firmware is 5.1

 

[dynonsupport]

There's no bug that we know of there, but I'm wondering if you simply have the course set backwards when on the ILS. Note that the course does need to be set manually, as ILSes, unlike VORs, don't have a directionality that the SL30 can automatically determine.

If you think you're setting it up correctly, can you take a picture of what you're seeing?

 

[georgev]

I have made sure I set the COURSE in the NAVSRC menu to the final magnetic track of the localizer. I will try to take a picture next time I fly the approach.