I have a D180 with the internal backup battery. The keep alive line is also connected to un-switched power. Today, on engine start, the unit went blank and re-booted as it did before I installed the backup battery. In addition, the time of day clock now resets to 00:00 every time the power is off. Is The Voltage display shows 12.5-14.5V, 0v 16.2V, the center value has always been zero.
This unit has version 5.0 of the firmware installed.
Is there anything I could have done to cause this or has the D180 failed?
This unit has version 5.0 of the firmware installed.
Is there anything I could have done to cause this or has the D180 failed?