D180 CHT/EGT pinouts

[MyInfosite]

Page 2-9 of the D180 Installation Guide gives pinouts for the 6 available type J (CHT) thermocouples and 6 available type K (EGT) thermocouples on the 25 pin male EMS connector. Unfortunately it does not show which channel is associated with these inputs. Can anyone help with the channel allocation?

I would also like to know if it matters if the above thermocouples have grounded or ungrounded sensor tips as both are available.

 

[dynonsupport]

Sorry about that. That's an error that we'll be fixing in the next revision of the manual. EGT1 is connected to pins 13 and 25. CHT 1 is connected to 12 and 24. They continue in alternating order like that down the connector.

 

[josok]

And grounded or not does not matter, the K and J type thermocouple inputs are floating.

Regards,

Jos Okhuijsen

 

[MyInfosite]

Many thanks to Dynon Support and to Jos for their prompt responses in providing the information.