billythefish
New Member
What is the 9-pin D connector typically used for, on the SV-EMS Harness?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
D9 on SV-EMS Harness
- Thread starter billythefish
- Start date
- Joined
- Mar 23, 2005
- Messages
- 13,226
The EMS harnesses are the same for the D10/D120/D180 and the SkyView. The D9 is used only on the D10/D120 for firmware updates. As covered in the SkyView EMS manual, it can be removed when using it with an SV-EMS.
billythefish
New Member
Thanks - does this mean that EMS Firmware upgrades take place through the display unit USB?
best,
=bill
best,
=bill
- Joined
- Mar 23, 2005
- Messages
- 13,226
Yes. All SkyView modules are updated from a Display.