Did Dynon Update

[jethound]

Now I have a big red X across my 7 inch display. The 10 inch is fine.
It appears that serial port to the Dynon GPS the old one has failed. i will trouble shoot this tomorrow as I have the GPS receivers crossed wired to the units on Serial port 4 and Serial port 5. I will switch the ports to the newer GOS receiver and see if the old GPS receiver has died.

This has worked well for 13 years

 

[jethound]

Now I have a big red X across my 7 inch display. The 10 inch is fine.
It appears that serial port to the Dynon GPS the old one has failed. i will trouble shoot this tomorrow as I have the GPS receivers crossed wired to the units on Serial port 4 and Serial port 5. I will switch the ports to the newer GOS receiver and see if the old GPS receiver has died.

This has worked well for 13 years

Cane out today turned on all systems and everything worked fine. Perhaps I did not shut the units down long enough before I powered them back up.
All is good

 

[Vivapitt]

Same thing happened to me but the red X never went away. I did a SETUP > NETWORK SETUP > CONFIGURE and the Xs went away. BUT, I lost all audible warnings and directions.

Anyone know how to get that back?