Displaying Timing from Light Speed PlasmaII

[ruplanecrazy]

Does anyone know if the Skyview is able to display the Digital Timing Information from the Light Speed Plasma II+ ?

 

[ruplanecrazy]

After reading some of the other posts.  I did some research at Light Speeds site and found that their signal can be used on a Digital mV Display  with .01V = 1 Deg.  So I was wondering if you could program a input to have .00 = 0V (deg) & .50 = 50V (deg)  Thank you for your Help

 

[vlittle]

I like this idea as well, but I realize it might be a hardware change in order to get the millivolt resolution.

Keep it in mind for the inevitable hardware revisions.

Vern

 

[dynonsupport]

Thanks for the suggestion. It's now added to our queue of suggested enhancements.