DSAB: Network Configuration Error

[fjdoug]

on power-up i am getting DSAB: Network Configuration Error.
i have FlightDek D180 and remote compass only.

the unit was recently back at Dynon to fix a button, i did not get this message previously.

do i simply re-configure as per ch.7 of the installation guide?

(i also cannot bring up zulu time to set the correct time, i suspect this issue is connected).

thanks.

 

[dynonsupport]

Yes, start with a simple reconfigure, and see if that helps. If not, get in touch with our support staff directly.

 

[fjdoug]

thanks, i reconfigured and no longer get the error mssg.
i was then able to set zulu time (although this may have been an error on my part).