Dual NAV Source on seperate HSI Displays now INOP

[jahajek]

Yes, before a release or so ago you could display different nav sources on different units connected by the DSAB or was this a fluke? I first saw this work on my panel builder's RV8 using a D100 and D120. I saw this as a feature and wanted a SL30 VOR/LOC/GS on one HSI and GPS on the other and saw it funtion this way first hand before I ordered the D180 and D100 units. We were surprised when we discovered this no longer worked after the release upgrade. Dynon acknowledged that this was no longer available in a phone conversation but suggested users could make request and see what happens. This was the intent of my first post on VAF Forum to get some interest from other users. As for the note to Dynon Support, this was a note of concern and personal disappointment of losing functionality. I understand this release change was to keep in line with true redundancy but I wish now I hadn't loaded the release.
__________________

 

[PhantomPholly]

Re: Dual NAV Source on seperate HSI Displays now I

They keep the old releases on line. You can "upgrade" to an older version.

 

[dynonsupport]

Re: Dual NAV Source on seperate HSI Displays now I

Actually, you can't go backwards in versions unless you have a backup. If you don't, you'll need to work with us for us to create a backup for you.

As was mentioned on VAF, this unintended "Feature" was changed in October 2007 so it's a lot of software versions back.