You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Dynon 10A Course Line on HSI
- Thread starter billriggs
- Start date
PhantomPholly
New Member
- Joined
- Jul 27, 2007
- Messages
- 582
If the service changed your settings, you may need to re-confirm that the correct settings for your external nav source (GPS? SL30?) are configured. Known settings for different nav devices are posted on the Wiki.
PhantomPholly
New Member
- Joined
- Jul 27, 2007
- Messages
- 582
Click here for the Wiki.
A Wiki is a web site where the individual pages can be updated by authorized users. Thus, the user community provides the documentation for interfacing successfully with other radios/GPS etc.
A Wiki is a web site where the individual pages can be updated by authorized users. Thus, the user community provides the documentation for interfacing successfully with other radios/GPS etc.
- Joined
- Mar 23, 2005
- Messages
- 13,226
What GPS are you using?
If you have a x96, and we upgraded your firmware from something older to 5.0 or newer, you need to have the output on your x96 set to "normal" not "fast." It's in the advanced serial output setup.
If you have a x96, and we upgraded your firmware from something older to 5.0 or newer, you need to have the output on your x96 set to "normal" not "fast." It's in the advanced serial output setup.