rvator51
Member
Does anyone know where you can get a base that the Dynon pitot probe fits into?
Dynon Aoa pitot probe bracket
- Thread starter rvator51
- Start date
dlloyd
Member
Safe Air1, see SafeAir1.com.
Yep. One way to do that is to keep the Al tubes coming out of the pitot itself straight. That way you can drop the whole thing straight down through the mount for complete removal.
I saw another builder's picture that showed the Al lines bent, precluding the straight down removal. I have already removed mine once for paint, etc.
I saw another builder's picture that showed the Al lines bent, precluding the straight down removal. I have already removed mine once for paint, etc.
jakej
Well-Known Member
21 years ago our aircraft had the tube mounted to the outboard inspection panel.
FYI & to help others - Ever since I've been doing installation work I've always done the same to other aircraft as it works well & makes for easy removal of the whole tube, mount & associated heater module (which just fits) assembly.
Jake J
FYI & to help others - Ever since I've been doing installation work I've always done the same to other aircraft as it works well & makes for easy removal of the whole tube, mount & associated heater module (which just fits) assembly.
Jake J
There's also the Gretz mount that is available from Aircraft Spruce.