The AMP Meter on my D120 fluctuates constantly from -10 to plus 15 Amps or so, nothing powered up except the D100, D120 and GPS 296 (Does it without the 296 as well). I have continuity from both of the dSub pins to the shunt, continuity from between the dSub pins thru the shunt and can see no problem with the pins in the dSub mounted on the D120. I "shorted" the two wires at the shunt end with no notable changes. Voltage is steady at 13.4 V. Everything else seems to be working normally.
I noticed the problem others have reported with engines running, noise etc but could find no reference to this problem with everything stable.
Any suggestions? Thanks
Larry
I noticed the problem others have reported with engines running, noise etc but could find no reference to this problem with everything stable.
Any suggestions? Thanks
Larry