edc connection

[garyz]

I have a efis d-10A with edc remote compas I checked wiring I am not getting voltage at pin 1 and 6 at the remote, what voltage does the efis send to the remote compas trying to see if I have some wires crossed thanks Gary

 

[dynonsupport]

12V. But, remember that the installer (probably you) pins out the EDC, so getting the wrong pin or grabbing the wrong wire accidentally happens from time to time. Make sure EDC pin 6 goes back to pin 12 on the EFIS connector, and that EDC pin 1 goes back to pin 24 on the EFIS connector.