EDC-D10A calibration

[kboyd59]

Wile trying to familiarize myself with my D-180 I came to the EDC-D10A calibration page, while I thought I was getting out of this page I hit the wrong button and it took me through the calibration. This was before I set the magnetic inclination angle and intensity, now my compass is very erratic, I was just wondering if I can reset it to the previous settings until I can calibrate it wright. Thanks for any information.

Ken Boyd
RV-9A
(57KB) reserved

 

[jakej]

Ken

I'd just pinput the MAG INCL etc, then do the compass cal - should work fine after that.

Jake J

 

[kboyd59]

Thanks Jake I will try it this afternoon.