EMS MODULE

Akash408

Member
Joined
Mar 16, 2021
Messages
48
Friend plz tell me I am new here,I have 24 volt battery.but fuel flow sensor required 12volt DC.so which thing convert this 24volt DC to 12 voltDc. EMS module or Displsy
 

Raymo

I love aviation!
Joined
Apr 25, 2016
Messages
1,063
Location
Richmond Hill, GA
The EMS will provide 12v for the flow transducer and 5 v for the oil, fuel and manifold pressure sensors.
 

jakej

Well-Known Member
Joined
Oct 10, 2007
Messages
2,137
Location
Adelaide, Australia
I think what Raymo meant to include is that 12v regulated OUT (if input is 12-24 volt) is on pin # 15, & 5 volt OUT is pin # 18 as per the manual.
So Akash408, you are correct but only if you use the #15 (12vlt) & # 18 (5vlt) pins.
 

Akash408

Member
Joined
Mar 16, 2021
Messages
48
O
I think what Raymo meant to include is that 12v regulated OUT (if input is 12-24 volt) is on pin # 15, & 5 volt OUT is pin # 18 as per the manual.
So Akash408, you are correct but only if you use the #15 (12vlt) & # 18 (5vlt) pins.
K thanks
 
Top